5
4
Please note the following instructions during assembly:
›
In normal operation, the locking components of the INSTINCT system by MACO automatically lock
when the door is closed. Therefore, ensure that end users carry a physical access medium assigned to
them permanently or that access via biometric or code-based access solutions is always guaranteed.
›
The door is always to be controlled by hand, door closer or motorised turning door drive to the
absolute closing position.
›
Regular operation of the door (at least once a month) must be ensured in order to prevent wear while
at rest.
›
The INSTINCT system by MACO has a standard integrated mode, which can be activated optionally
via a button or the INSTINCT App, for simplified daily operation (day release). When this mode is
activated, the system temporarily no longer locks when the door is closed, but merely holds the door
leaf. In this operating mode, the requirements for joint tightness, sound insulation, rain tightness,
thermal insulation and burglary inhibition are not met. Please note that in this operating mode the
door can also be opened at any time and without prior electronic operation by any person and thus
potentially by unauthorised persons. After deactivating this operating mode, the door must be
opened once and then closed again to ensure that the door is properly locked.
›
The INSTINCT system by MACO has a standard integrated parental control mode that can only be
activated via the App. When this mode is activated, the door can no longer be activated from the
inside by simply pressing the button or with other electronic controls or put into day release
operation. For normal opening, but also in the event of an emergency, the door can be unlocked from
the inside by means of an extended button press of 5 seconds. During this mode, the unlocking via
access control or intercom systems continues to be unaffected, provided that these are connected via
the interfaces or connections specially provided for this purpose.
›
In order to ensure the proper functioning and thus the operational safety of the INSTINCT system by
MACO, the instructions in Chapter 7 (Maintenance, Cleaning & Care) must be adhered to.
5. Improper use
The consequences of improper use or misuse can be permanent damage as well as destruction, which
may impair or prevent the reliable functioning of the INSTINCT system by MACO or the door. MACO as-
sumes no liability, warranty or any separately agreed warranty for damages and destruction caused by
misuse.
Please note the following instructions during assembly:
›
Deliberate or uncontrolled slamming or pressing of the door leaf can cause damage to hardware, sash
and frame materials as well as other individual parts of the door.
›
Inserting obstacles or foreign objects into the opening space between the sash and frame may cause
damage to hardware, sash and frame materials as well as other individual parts of the door.
›
The actuation of the door via tools or lever-effective aids is an improper manipulation. This manipula-
tion can cause damage to hardware, sash and frame materials as well as other individual parts of the
door.
›
Any additional weight loading on the door element that go beyond normal manual operation can
result in damage to hardware, sash and frame materials as well as other individual parts of the door.
›
Uncontrolled slamming or swinging due to gusts of wind or draught can cause damage to hardware,
sash and frame materials as well as other individual parts of the door. In the case of draughts, pre-an-
nounced or oncoming winds or storms, the door must therefore be closed again immediately after
operation has taken place.
›
Adjusting the door hinges affects the gap between the door frame and the door leaf (rebate gap).
Incorrect adjustment of the door hinges causes the gap to become too small or too large or can lower
the door. This can impair or prevent the correct functioning of the locking system. In addition, this
can cause damage to hardware, sash and frame materials as well as other individual parts of the door.
›
Any manipulation of the system components that goes beyond the adjustment possibilities descri-
bed in the context of the assembly instructions and thus expressly permitted is strictly prohibited.
This applies in particular to the manual actuation of the locking hook in the open state or the change
in the setting of the striker plate by non-skilled personnel.
›
Objects and larger dirt particles in the opening area of the door can impair the proper closing function
of the door. If these are clamped between the door leaf and the floor, damage to floor coverings,
hardware, sash and frame materials as well as other parts of the door can occur.
