Macnica Mpression 12G-SDI FMC Card, Getting Started

Page: 9 / 15

12G-SDI FMC Card
Getting Started - 12G-SDI FMC Card 9
© Macnica, Inc.
3.
Introduction
3.1 About This Document
This manual describes how to use the reference design used by our 12G-SDI FMC Card (hereafter
FMC card).
3.2 Required Hardware and Software
Hardware

12G- SDI signal generator (e.g. Blackmagic Design’s Teranex Express)

Monitor or analyzer that supports 12G- SDI input (e.g. Blackmagic Design’s SmartView 4K)

Arria 10 GX FPGA Development Kit (board/AC adapter/micro-USB cable)

BNC cable: 2

FMC card (card/jumper caps 2 pcs.)
Software

Quartus Prime Standard Ver. 16.0 Update 2 (Intel FPGA programming software)

Reference design (You can download the documents and designs from the URL written in the
Packing list. )
3.3 Related Materials
Materials provided by Macnica: Title (document number)

12G-SDI FMC Card Schematic (DATA_000070)

12G-SDI FMC Card Reference Manual (DCMT_000331)
Materials from Intel (document number)

Multi Rate Up to 12G SDI II Reference Design for Arria 10 Devices ( AN768 )

SDI II IP Core User Guide ( UG-01125 )
Materials from Blackmagic Design

Teranex Express Manual

SmartView 4K Manual