12G-SDI FMC Card
Getting Started - 12G-SDI FMC Card
13
© Macnica, Inc.
6.
Procedure to Implement Reference
Design
The following shows the procedure for implementing the reference design.
1.
Use Quartus Prime to un-compress the reference design in a project.
2.
Compile the developed project and generate a programming file.
3.
Write the programming file that you generated to the FPGA.
4.
Press the CPU_RESET push button on the Arria 10 GX FPGA Development Board one time.
5.
Refer to Figure 6-1 and Table 6-1 to confirm the status of the LEDs on the FMC card and the
Arria 10 GX FPGA Development Board.
Figure 6-1. Positions to Confirm LEDs
D1
-
4
( 12G
-
SDI FMC Card )
D9
( 12G
-
SDI FMC Card )
D3
-
D10
( Arria 10 GX Development board )
D5
( 12G
-
SDI FMC Card )
