
3
CONFIGURATION OF THE UNIT
The PR has been designed to be implemented in many types of applications. For that reason, a SETUP-level is
available to configure your PR according to your specific requirements.
It includes several important features, such as K-factors, measurement units etc. All setting are stored in EEPROM
memory and will not be lost in the event of power failure.
DISPLAY INFORMATION
The unit has a large transflective LCD with various kinds of symbols and digits to display measuring units, status
information and key-word messages.
Flowrate and total are displayed on 12mm digits.
A backup of the total and accumulated total in EEPROM memory is made every minute.
FUNCTIONS AND FEATURES
The flow rate / totalizer model PR is a microprocessor driven instrument designed to display flow rate, total and
accumulated total.
This product has been designed with a focus on:
•
Ultra-low power consumption to allow long-life battery powered applications.
•
The glass reinforced polypropylene housing offers IP67 environmental protection.
INTRODUCTION
MOUNTING EXAMPLES
INSTALLATION
The display has a unique M-lock mounting feature. It can be installed on
•
MX meter body
•
MX wall mount bracket
To install, secure the display on the cam and rotate quarter turn clock-wise (90 degrees)
To uninstall, hold the display and rotate quarter turn anti clock-wise (90 degrees)
DISPLAY EXAMPLES
There are no tools required to install/ remove the display
WARRANTY
For warranty terms & conditions, visit
https://au.macnaught.com/warranty
Flow rate example
Total example
Display features Decimals and various units of measurement
Mounting on MX meter body
Mounting on wall mount bracket