E6
HOW TO USE
Directly Fitted Pump into the Drum
1. Insert the suction tube of pump into the drum and secure with ring nut, suitable for
commercial drums with 57 diameter hole and threading 2” BSP.
2. Fit a oil delivery tube for oil outlet of the air operated pump using only high quality tubes
(normally 3/4”, according to DIN-SAE norms(), by means of 3/4” BSP threading fitting.
3. Oil delivery pistol: Connect delivery tube with delivery pistol using suitable pipe fittings, and
point the pistol at right place.
4. Air inlet connection is 1/4” quick plug ( or 1/4” NPT female) in all versions. Compressed air
connection ( to be supplied by the customer) should be done using suitable tube.
5. A pressure regulator to keep the pump’s working pressure at the best possible level (max
5-8bar/70-115psi) between the pump and the compressed air line.
6. A cut-off switch can enable the operator to stop the pump at any given moment by cutting
the air supply off between the pump and the compressed air line.
7. Switch on all switch.
Connect the Pump with Other Accessories:
Part List
Description
Oil pump
Bung adapter
Oil pistol
Hose with fitting
Air hose with quick coupling
Drum
Filter, pressure regulator and lubricator
Part No.
1
2
3
4
5
6
7(7-1, 7-2, 7-3)
3
4
5
1
7
2
6
