background image

Do not use the heater in the immediate surroundings of a bath, shower or 

swimming pool.

Children of less than 3 years should be kept away unless continuously 

supervised.

Children aged from 3 years to 8 years shall only switch on/off the appliance 
provided that it has been placed or installed in its intended normal operating 
position and they have been given supervision or instruction concerning use of 
the appliance in a safe way and understand the hazards involved. Children aged 
from 3 years and less than 8 years shall not plug in, regulate and clean the 
appliance or perform maintenance.

This appliance can be used by children aged 8 years and above and persons 
with reduced physical, sensory or mental capabilities or lack of experience and 
knowledge if they have been given supervision or instruction concerning use of 
the appliance in a safe way and understand the hazards involved. Children shall 
not play with the appliance. Cleaning and user maintenance shall not be made 
by children without supervision.

CAUTION: some parts of this product can become very hot and cause burns. 
Particular attention must be given where children and vulnerable people are 
present.

Installation Instructions

Before installing, check that all parts are complete and the product is intact.

If you want to use the electric heater freestanding, please fit with the feet 
provided with the heater, following the instructions below. Make sure the heater 
is mounted on a level, stable and clean surface.

Freestanding Installation

1. Put the product upside down on a 

soft cotton cloth or carpet.

2. Fix the feet to the base of the 

heater using the screws provided. 
Line up the holes in the base with 
the holes in feet, put the screws 
through the holes and tighten with 
a screwdriver.

Summary of Contents for MCE502
















Reviews: