![background image](http://html1.mh-extra.com/html/mackworth/m180/m180_service-manual_3237672030.webp)
995068 – Revision A
Page 30 of 36
Step 4 – The Carry Bar can be removed from the Hoist.
Refitting / Replacement
Step 5 - Refitting is a reversal of the removal process noting the following point:
A)
Ensure the Bolt is secured correctly with the correct washers. (bolt, washer, nylon
washer, Carry Bar, washer, nut)
B)
Ensure Carry Bar is able to swivel freely.
C)
Apply the Pin thread with Loctite 243.
Step 6 – Inspect the Wear washer circled, replacement is necessary if thickness is measured
to be 0.5mm or under.