![background image](http://html1.mh-extra.com/html/mackworth/m180/m180_service-manual_3237672023.webp)
995068 – Revision A
Page 23 of 36
9.7 –
Manual Leg Opener
Within this section it will explain the correct procedure on removing and reinstalling the
Manual Leg Rods for servicing procedures or replacement.
Removal
Step 1 – Place the Hoist on its side for easier service – Gently rest the Hoist on its side to
avoid damage such as paint scratching.
Step 2 - Remove the Leg Rods from the Hoist. (Refer to section 9.6)
Step 3 – Remove the End Bolt from the Leg Pivot Plate as shown below using a 6mm Allen
Key.
Step 4 – Once the Bolt is removed, the Leg Lever Plate Pin can be removed.
Step 5 – Remove the bolt and washer shown to release the Leg Lever Plate using a 5mm
Allen Key.