Adjusting the Vacuum Snout Height
1. The height of the vacuum snout can be adjusted to allow you to vary the
suction to meet the surface conditions. For short turf with light leaf fall, it
can be lowered to 1-1/4" off the surface. For long turf and heavy leaf fall, it
should be raised to the upper setting about 2 3/4 inches.
2. For moving the machine long distances, you will avoid damage to the snout
by raising it to the highest setting.
3. To raise the snout: Grasp the height adjuster handle, apply pressure away
from the adjuster plate and BACK towards the
operator’s position (
Figure
20
).
4. To lower the snout: Grasp the height adjuster handle, apply pressure away
from the adjuster plate and FORWARD away from the
operator’s position.
Figure 20
CONTACT US AT
www.MacKissic.com
15
