background image

9

S225 SPECIFICATIONS

Acoustic Performance

         

Frequency Range (–10 dB)

                            

                 46 Hz–20 kHz

         

Frequency Response (–3 dB)

                                                      70 Hz–18 kHz
         

Horizonal Coverage Angle (–6 dB)

                                                      90º averaged 2 kHz to 10 kHz
         

Vertical Coverage Angle (–6 dB)

                                                      40º averaged 2 kHz to 10 kHz
         

Directivity Factor; DI (Q)

                                                      11.9 (15.6) averaged 2k Hz to 10 kHz
         

Sensitivity (1W/1m)

   102 dB SPL

         

Max SPL long-term

      132 dB @ 1m

         

Max SPL peak             

135 dB @ 1m

         

Crossover Point

            1300 Hz

Input/Output

         

Input/Output Type

       Neutrik Speakon™ and 

                                                      female 1/4-in. TS jack
         

Input Impedance

          4 ohms

         

Recommended Amplifi er Power

                            

                 700 watts rms continuous

                                                      2800 watts peak

High-Frequency Section

       Voice Coil Diameter

    1.75 in/44 mm

         

Horn Exit Diameter

    1.0 in/25 mm

         

Phase Plug   

                 Optimized geometry

         

Diaphragm Material

   Titanium

         

Magnet Material

           Ferrite

Low-Frequency Section

       Number of Drivers

       2

         

Woofer Diameter

           15.0 in/381 mm

         

Voice Coil Diameter

    2.5 in/63 mm

         

Diaphragm Material

   Epoxy-reinforced cellulose

         

Magnet Material

           Ferrite

Safety Features

         

In put Protection

           Dynamic protection for 

                                                      compression driver

Construction Features

         

Basic Design

                 Trapezoidal, 10º side angles

         

Material

                           18 mm multi-layered plywood, 

                                                      resin end caps
         

Finish

                               Wear-resistant textured black 

                                                      PVC vinyl
         

Handles

                            One on each side, one top, one bottom

         

Grille

                                 Perforated metal with weather-

                                                      resistant coating

Physical Properties

         

Height

                               50.0 in/127.0 cm

         

Front Width

                    19.1 in/48.5 cm

         

Rear Width

                      13.9 in/35.3 cm

       Depth

                                  18.1 in/46.0 cm

         

Weight

                               99.5 lb/45.1 kg

         

Mounting Methods

       

Floor mount only.

                                    The S225 should never be pole-mounted.
                                    The S225 cabinet has no rigging points and is 
                                    not suitable for fl ying. 

Never attempt to suspend  

                                    the cabinet by its handles.

Disclaimer

         Since we are always striving to make our  products better by in-
 cor po rat ing  new  and  im proved  ma te ri als,  com po nents,  and  man u fac -
tur ing methods, we re serve the right to change these spec i fi  ca tions 
at any time with out no tice.

“Mackie” and the “Running Man” fi gure are reg is tered trade marks 
of LOUD Technologies Inc.

All other brand names men tioned are trade marks or  registered 
trademarks of their respective hold ers, and are hereby ac knowl edged.

©2004-2005 LOUD Technologies Inc.
All Rights Reserved.

CARE AND MAINTENANCE

Your Mackie loudspeakers will pro vide many years of 

reliable ser vice if you fol low these guide lines:

Avoid exposing the loudspeakers to 
mois ture. If they are set up out doors, 
be sure they are under cover if you 
expect rain.

Need Help?

You can reach a technical support representative 

Monday through Friday 

from 7 AM to 5 PM PST at:

1-800-898-3211

After hours, visit www.mackie.com and click Support, 

or email us at: [email protected]

• 

Avoid exposure to extreme cold (be low freezing 
tem per a tures). If you must operate the loud-
 speak ers in a cold en vi ron ment, warm up the voice 
coils slowly by sending a low-level sig nal through 
them for about 15 minutes prior to high-power 
op er a tion.

• 

Use a slighty damp cloth with a mild soap so lu tion 
to clean the cabinets. Only do this when the power 
is turned off. Avoid getting mois ture into any of the 
open ings  of  the  cab i net,  par tic u lar ly  where  the  driv-
ers are located.

Summary of Contents for S225













Reviews: