background image

2

1.

  Read these instructions.  

2.

  Keep these instructions.

3.

  Heed all warnings.

4.

  Follow all instructions.

5.

  Do not use this apparatus near water.

6.

  Clean only with dry cloth.

7.

  Do not block any ventilation openings. Install in accordance with the 

manufacturer’s instructions.

8.

  Do not install near any heat sources such as radiators, heat registers, 

stoves, or other apparatus (including amplifi ers) that produce heat.

9.

  Only use attachments/accessories specifi ed by the manufacturer.

10.

Use only with a cart, stand, tripod, bracket, or table specifi ed by the 

manufacturer, or sold with the apparatus. When a cart is used, use 
caution when moving the cart/apparatus combination to avoid injury 
from tip-over.

11.

Refer all servicing to qualifi ed service personnel. Servicing is required 

when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects have 
fallen into the apparatus, the apparatus has been exposed to rain or 
moisture, does not operate normally, or has been dropped.

12.

Exposure to extremely high noise levels may cause permanent hearing 

loss. Individuals vary considerably in susceptibility to noise-induced 
hearing loss, but nearly everyone will lose some hearing if exposed to 
suffi ciently intense noise for a period of time. The U.S. Government’s 
Occupational Safety and Health Administration (OSHA) has specifi ed 
the permissible noise level exposures shown in the following chart.

      According to OSHA, any exposure in excess of these permissible limits 

could result in some hearing loss. To ensure against potentially danger-
ous exposure to high sound pressure levels, it is recommended that all 
persons exposed to equipment capable of producing high sound pres-
sure levels use hearing protectors while the equipment is in operation. 
Ear plugs or protectors in the ear canals or over the ears must be worn 
when operating the equipment in order to prevent permanent hearing 
loss if exposure is in excess of the limits set forth here. 

IMPORTANT SAFETY INSTRUCTIONS

WARNING

 — To reduce the risk of 

fi re or electric shock, do not expose this 

apparatus to rain or moisture.

Duration Per Day 

 Sound Level dBA, 

Typical

  In Hours 

Slow Response 

Example

 

90 

Duo in small club

 6 

92 

 

 4 

95 

Subway 

Train

 3 

97

 

100 

Very loud classical music

 

  1.5 

102

 

105 

Tami screaming at Adrian about deadlines

 0.5 

 

110

 

 0.25 or less 

115 

Loudest parts at a rock concert

PORTABLE CART WARNING

Carts and stands - The
Component should be used
only with a cart or stand
that is recommended by
the manufacturer.
A Component and cart
combination should be
moved with care.  Quick
stops, excessive force, and
uneven surfaces may cause
the Component and cart
combination to overturn.

Summary of Contents for S225













Reviews: