Mackie HDR 24 Quick Start Manual Download Page 3 | Manualshive

Page: 3 / 56

Mackie HDR 24 Quick Start Manual Download Page 3

3

Quick Start Guide

Quick Star

t Guide

®

Please write your serial number here for future
reference:

Purchased at:

Date Of Purchase:

Contents

Introduction ----------------------------4

Conventions ---------------------------------- 5
About “Tape” --------------------------------- 5
Overview -------------------------------------- 6

Setup & Configuration----------------7

Required Equipment ------------------------ 7
Installation------------------------------------ 7

I/O Cards & Cables ------------------------------- 8
Sync Card & Cable - Word Clock and Digital
Synchronization ---------------------------------- 10
Mackie Media (Optional) ----------------------- 12
Monitor / Mouse / Keyboard (Optional) --- 13
Remote 24 / Remote 48 Pro (Optional) ----- 14
Footswitch (Optional) --------------------------- 14

Power-Up -------------------------------------- 14
Configuration--------------------------------- 15

I/O Cards ------------------------------------------- 15
Synchronization ---------------------------------- 19

Hookups ----------------------------------------20

Analog Hookup (AIO•8) ------------------------- 20
TDIF Hookup (DIO•8) ---------------------------- 22
ADAT Optical Hookup (DIO•8 or OPT•8) ---- 24
AES/EBU Hookup (PDI•8) ----------------------- 27

HDR24/96 Operation-----------------29

Opening Projects ---------------------------- 29
Basic Transport Operations ----------------30
Time Displays --------------------------------- 31
Locate Points and Looping----------------- 32
Cues -------------------------------------------- 34
Creating Projects ---------------------------- 36
Naming Tracks-------------------------------- 38
Monitoring ------------------------------------ 38
Metering and Setting Levels -------------- 40
Recording ------------------------------------- 42
Autopunch ------------------------------------ 44
Footswitch Operation ---------------------- 45
Delete Last ------------------------------------ 46
Saving Projects --------------------------------46
Project Backup / Restore ------------------ 47

Appendix A: Compatible Cables ----50

Analog and Digital Multitrack Cables ----50
Other Cables---------------------------------- 51

Troubleshooting and Service--------54

Manual Part No. 820-225-00 Rev. B 11/00
© 2000 Mackie Designs Inc., All rights reserved
Printed in the U.S.A.

«
1
2
3
4
5
...
»

Summary of Contents for HDR 24

























































Reviews:

No comments