23
4. MacFi-mpe ENHANCED FEATURES
The purpose of this section is to document and explain the
added features of the MacFi-mpe. In brief, these features
include RS-232 (Serial) control and Synchronization Relay.
These features also change some physical attributes of the
original MacFi unit. These physical changes include, a 3 position
Euro style connector for serial communications, an RCA type
input for automated sync track encoding, a sync pushbutton for
manual sync track encoding. The sync track relay populates
positions 2 and 3 of Connector 2, which were previously
unused.
For more details on use of the Enhanced Features of the
MacFi-mpe please obtain the User's Manual for this product,
Doc 99-20-044.
4.1 RS-232 (Serial) Command List
CMD
Options
Description
BAS
[<0,+/-12>]
Set Message Bass Level.
BBT
*Memory Bad Blocks Test.
CFG
*Restore Default Configs.
DIR
Directory of Message Priority.
DEL
[<1-99>]
*Delete Message.
DLD
[<1-99>]
Download MPG Message.
DLY
[<0,+/-99>] (+=sec, -=min)
Delay Before 1st Play Start.
LST
This Commands Listing.
PAS
[<0,+/-99>] (+=sec, -=min)
Pause Between Play Repeats.
PLS
[<1-99>]
Number of Plays per Trigger.
PLY
[<1-99>,<1-99>,<0,+/-99>]
Play Message,Repeat,Delay.
PRI
[<1-99>,<E>nable/<D>isable]
Set Priority Message,Enable.
REC
[<1-99>,<1-99>,<0,+/-99>]
Record Message,Delay,Time.
RST
Warm Reset System
SHP
*Init Configs & Erase Messages.
STP
Stop Message Playback.
STS
[<0>Off/<1>On]
Display Play Status Messages.
SYS
Display System Information.
TRE
[<0,+/-12>]
Set Message Treble Level.
ULD
[<1-99>]
Upload MPG Message.
* = Confirmation Required
