MacKay Guardian SOLO, Operation And Maintenance Manual

Page: 47 / 79

MacKay Guardian™ Solo
Operation and Maintenance Guide, v. 1.5
Note:
6.4 Meter & LCD Display Activity During & Following Reset
When the reset button is pressed and released, the primary time of day clock is shortly halted and
started. Any previously purchased time is lost and the meter display time is reset to zero. The
graphics display will be cleared while the reset button is depressed. When the reset switch is
released, the meter carries out an internal health test/diagnostic, and if no problems are detected,
it goes into normal service. During the reset cycle, the meter carries out what is referred to as its
“LAMP TEST” and the following actions occur:
Once the meter initialization/start-up process and lamp test is started, it should be allowed to run
to completion without interruption.
1)
When the reset button is pressed, there will be an initial display pattern presented, then
the display on the LCD will display the following information:
Year / Month / Day
Time: HH:MM:SS
Group ID# Meter ID#
Max Time Rate per Period $X.XX /hr
Profile Version #
Display Attribute Field Version #
Define Rate Profile Version #
Coin Attribute File Version #
Blacklist Field Version #
Purse Configuration File Version # - memo cards
Radio Configuration Version #
37