MACHINE SOLUTIONS BEAHM DESIGNS 43-B, User Manual

Page: 3 / 18

© Copyright. Machine Solutions Inc. All Rights Reserved PM-62319 REV B 3
Equipment User Manual
Welcome
Machine Solutions, Inc. (MSI) would like to take this opportunity to thank you for
purchasing your new 43-B Bench Top Die Necker. At MSI, we are dedicated to bringing
innovative process development solutions to both medical device and nonmedical
organizations. MSI looks forward to helping your organization provide life-improving
devices to your customers, today and tomorrow.
Purpose
The purpose of this document is to describe the electrical and software design of
the control system for the Split Die Thermal Bonder, 43-B. This document also includes
operator instructions.
Overview
The Beahm Designs Die Necker progressively reduces tubing diameter by means of a
heated die. Tubing is manually drawn through the die to the desired length. The I.D. of the
interchangeable dies controls the diameter of the neck tubing.
Contents
1. Benchtop Die Necker
2. Power cord
Installation
1. Place the system on a level, sturdy surface at an ergonomically viable height for
the user.
2. System power is in the OFF position.
3. Connect the power cord to the main control unit.
4. Connect the air supply to the system and then to a clean, dry, and filtered
compressed air source.
5. Connect the electrical umbilical to the die base unit.