19a
500 D 04/2010
Printing and output
When you press key
OK
at this point, all stored data are transferred via the 9-pin
serial interface to a ready serial printer to be printed.
(Make sure that the transfer rates of printer and photometer are set to the same
values, e.g. 9600 baud, no parity, 8 data bits, 1 stop bit, no protocol.)
If a PC is connected via serial or USB cable, data can also be transferred to an
external terminal programme.
For convenient handling of the data transfer we recommend the MACHEREY-
NAGEL programme „Photometer Data Export“, REF 919 02.
The photometer has to be in method selection mode and the data transfer is
controlled by the programme either via serial or USB connection.
Display
When you press key
OK
at this point, you can display all data sets in sequence us-
ing key
U
. If you have previously made a selection only the selected data sets are
displayed.
17.11.11 16:06
17.11.11 16:06
MEMORY:
0761 total P
0001
1.22 mg/L P
✓
17.11.11 16:06
✓
17.11.11 16:06
MEMORY:
0761 total P
0002
0.95 mg/l P
Using key
U
you can return to the last-displayed value. With key
MEM.
and confirma
-
tion with
OK
you can delete any data set. Pressing key
OK
the displayed data set is
transferred to the interfaces.
Deleting data
When you press key
OK
at this point, and confirm deletion by pressing
OK
once
more, the selected data or – as in the case below – all data sets are deleted from
the memory.
17.11.11 16:06
✓
MEMORY: 046/046
delete ?
Selecting data
17.11.11 16:06
✓
MEMORY: 046/046
selection ?
The following options for selection are available:
method number / sampling location / date / time
When you press key
OK
at this point, you access the selection mode.
