ASSEMBLY INSTRUCTIONS
ADULT INSTALLATION REQUIRED.
TOOLS REQUIRED:
Level (A)
Measuring tape (B)
Power drill (C)
•
READ ALL INSTRUCTIONS BEFORE ASSEMBLY OF DIAPER CHANGING STATION.
• Unpack carton and identify all parts.
2
www.macdonaldindustries.co.nz
PARTS LIST
Parts Description
Quantity
Door / Wall Plate
1
WARNING:
• This changer has six (6) recess mounting holes.
• The diaper changing station is no stronger than the anchors or walls to which they are
attached and, therefore, MUST be firmly secured in order to support the weight they are
intended to support. It is recommended that this unit be installed in a recessed fashion. If
surface mounting, contact an architect, building contractor, or professional engineer for proper
installation and hardware. Contact an architect or building contractor if any questions.
• Child should never be left unattended.
• Avoid serious injury from falling or sliding out. Always use restraint system.
• Adding excessive weight such as parcels, packages, or accessories to the unit or to the bag
hooks that exceed the total weight limit of 23 kg may cause the unit to be unstable or may
cause a hazardous unstable condition to exist.
IMPORTANT:
Due to widely varied wall material, anchoring to
be determined by architect or engineer.
543
457 (R)
543 (SM)
845
