R2 Series Clinic Handout 11
Manual Rear Baffle
1 . Remove lynch pin
(A)
securing rear baffle adjustment lever
(B)
to bracket
(C)
.
2 . Pull rear baffle adjustment lever
(B)
inboard to disengage
from bracket
(C)
.
3 . Position rear baffle adjustment lever
(B)
as follows:
•
Move the lever forward to raise the baffle
•
Move the lever backward to lower the baffle
4 . Release rear baffle adjustment lever
(B)
so that the tab engages
the hole in bracket
(C)
.
5 . Secure baffle adjustment lever
(B)
with lynch pin
(A)
.
1 . Deflector fins
(A)
are located on the underside of the rear baffle .
2 . To adjust deflector fins
(A)
, use existing bolt and nut
(B)
.
Once adjusted to the desired angle for windrow width, torque nut to 69 Nm
(51 lbf·ft) .
3 . Repeat for all fins
Positioning Rear Baffle Deflector Fins
Note:
An optional In-Cab Electric Remote Baffle Adjustment Kit (B6664) is available for R216 headers .
Note:
Fins may interfere with crop flow in large-stemmed crops,
or when using the double windrower attachment . It may be
necessary to remove fins in these conditions .
Deflector fins (A) can be put in storage position by removing
existing nut and bolt and reattaching fins on top of the baffle .
Summary of Contents for R2 Series
Page 1: ...R2 Series Clinic Handout...
