R113/R116 Rotary Disc Pull-Type Mower Conditioner Quick Card MD #147624
Supplement to R113/R116 Operator’s Manual
R 113 / R116 Qu i c k C a r d
Subject to change without notice.
Use this card as a guide only. Refer to your Operator’s Manual
for detailed settings and adjustment procedures.
(A) Wide:
Deflectors outboard.
(B) Narrow:
Deflectors inboard.
Roll Cond:
Move bar (C).
Finger Cond:
Move handle (D).
Wide (A):
Lower baffle (C)
Narrow (B):
Raise Baffle (C)
Finger Baffle
Roll Baffle
Smooth/Level/Firm Ground:
10 mph (16 kph) and higher until cutting and conditioning quality
are compromised.
Rocks/Ridges/Loose Ground:
Slow to minimize bouncing, uneven stubble and damage to cutter
bar.
G r o u n d S p e e d
(A) acres/hr, (B) hectares/hr, (C) kph, (D) mph, (E) 16 ft., (F) 13 ft.
Refer to Operator’s Manual.
Switch at (A).
Light (C) On.
Tr a n s p o r t
Field Mode
Switch at (A).
Light (C) Off.
Transport Mode
1000 PTO rpm
800 PTO rpm
Light/Thin Crop
Heavy/Tough Crop
D i s c S p e e d
1. Loosen (C).
2. Turn (D) CW.
3. Tighten (C).
1. Loosen (C).
2. Turn (D) CCW.
3. Tighten (C).
Rocks/Ridges/
Loose Ground (100 lb)
Smooth/Level/
Firm Ground (125
–
150 lb)
F l o a t
Tips:
• Sharp blades reduce horse power requirements.
• Install cutterbar filler plates in tall, stemmy crops.
• Remove rear filler plate to reduce dirt accumulation in cutterbar.
Side Deflectors
W i n d r o w
