215104
194
Revision A
1029712
A
B
Figure 6.28: Header Float Linkage
17. Remove the clevis pin from storage position (B) in linkage
and insert into hole (A) to engage the float springs. Secure
with hairpin.
1029697
A
Figure 6.29: Safety Prop Lever
18. Disengage the safety prop by turning lever (A) downwards
until lever locks into vertical position.
19. Repeat for opposite safety prop.
1008947
A
Figure 6.30: Ground Speed Lever
CAUTION
Check to be sure all bystanders have cleared the area.
20. Start the engine and press HEADER DOWN switch (A) on
the GSL to fully lower the header.
21. Shut down the engine, and remove the key from the
ignition.