215981
90
Revision A
1015478
A
B
Figure 5.23: Left Cab-Forward Platform
13. Push latch (A) to unlock platform (B).
1012700
A
Figure 5.24: Left Cab-Forward Platform
14. Pull platform (A) toward the cab until it stops and the latch
is engaged.
Attaching Forming Shield
If the windrower will be paired with a MacDon A40DX Auger Header equipped with a conditioner, then the forming shield
should be installed on the windrower. The forming shield is not required if the windrower will be paired with an A40DX GSS
Auger Header, though it can be useful for crops such as radishes.
1018874
A
B
Figure 5.25: Bolt and Spacer Installed on
Windrower Leg
1.
Place spacer (B) over 1/2 x 8 in. hex bolt (A). Insert the bolt
into the windrower leg as shown. Secure the bolt with the
1/2 in. nut.
2.
Repeat the previous step to install the bolt, spacer, and nut
on the other windrower leg.