147867
38
Revision J
1020090
Figure 3.60: Caution Message
IMPORTANT:
If the master controller and the Harvest Performance Tracker
(HPT) display software compatibility characters do not match, an
error may be displayed on the HPT. If error occurs, update the
HPT display software as described in
Performance Tracker Software, page 9
.
NOTE:
Header and windrower settings may have changed during
update. Please check all settings before operation.
3.6.2
Updating Master Controller Software on an Android Device
IMPORTANT:
Filenames are case sensitive and
MUST
remain in original format. Additional characters cause problems with the update
process.
Before updating the master controller, ensure you have completed the following tasks:
•
Install the IQANsync application from the Google Play store onto a Bluetooth
®
enabled Android device. Refer to
•
Install an IQAN G11 Bluetooth
®
Module. Refer to
3.4 Installing an IQAN G11 Bluetooth
•
Download the master controller software update from the MacDon Dealer Portal. Refer to
Controller Software Update, page 29
1.
Enable the Android device
’
s Bluetooth
®
feature.
1016204
A
B
C
D
Figure 3.61: Ignition Switch on Console
A - ACC
B - OFF
C - RUN
D - START
2.
In the windrower cab, turn the ignition key to ACC position
(A). The windrower
’
s electrical accessories are turned ON,
but the engine remains OFF.
NOTE:
For the following steps, you must be in or next to the
windrower cab so that the Bluetooth
®
device can connect
with the IQAN G11 Bluetooth
®
Module in the cab headliner.
3.
Open up the email program and select the email message
with the software attached.
4.
Open the software attachment.
