147867
19
Revision J
3.4
Installing an IQAN G11 Bluetooth
®
®
Module
The IQAN G11 Bluetooth
®
Module is required to update the master controller software. To install the IQAN G11 Bluetooth
®
Module, follow these steps:
1016005
A
B
Figure 3.25: Relay Module Cover in Cab Headliner
1.
Locate relay module access door (A) on the inside the cab,
in the front left corner of the headliner.
2.
Turn latch (B) to open.
1018744
A
Figure 3.26: Relay Module and Harness Connector
3.
Locate roof harness connector P826 (A).
1018745
A
Figure 3.27: Relay Module and Harness Connector
4.
Attach IQAN G11 Bluetooth
®
Module (A) to roof harness
connector P826.
5.
Close the relay module cover and secure with latch.
