215505
16
Revision A
$
Figure 4.2: Bushing Clamp
7.
Release bushing clamps (A) using a small screwdriver to
separate the serrations. Pull the clamp off the tine tube.
$
%
Figure 4.3: Bushing
8.
Rotate tine tube arm (A) until clear of the disc and slide the
arm inboard off of bushing (B).
9.
Remove bushing halves (B). If required, remove the next
steel or plastic finger, so the arm can slide off the bushing.
Refer to the following steps as necessary for removing steel
or plastic fingers:
$
%
Figure 4.4: Removing Steel Finger
Steel Finger
10. Remove bolts (B) from the existing fingers and slide the
fingers over the tine tube to remove. (remove tine tube
arms (A) from the tine tubes as necessary).
