Form # 147083
Issue 01/07
32
OPERATION
UPPER CROSS AUGER (Optional)
For tall or bulky crops, the optional upper cross
auger will aid crop flow across the header and
through the delivery opening.
The vertical position of the upper cross auger is
adjustable for best feeding of the crop. Extremely
tall crops will require a higher setting.
To adjust vertical position:
21’ & 25’ Headers
•
Loosen two bolts (A) both sides.
•
Adjust vertical position with drawbolt (B).
•
Exposed thread on bolts (B) should be the
same both sides.
•
Check that height is consistent across the
header and adjust as necessary.
•
Tighten all hardware.
30’, 36’ & 39’ Headers
•
Loosen two bolts (A) both sides.
•
Adjust vertical position with drawbolt (B).
•
Exposed thread on bolts (B) should be
equal.
•
Loosen two bolts (C) at center bearing
support.
•
Loosen jam nut on drawbolt (D) and adjust
vertical position of center support to align left
and right augers.
•
Check that height is consistent across the
header and adjust as necessary.
•
Tighten all hardware.
NOTE:
If experiencing crop wrapping on beater
bars at center of upper cross auger, remove
beater bars and mounting clamps.
ADJUST AUGER VERTICAL POSITION
L/H & R/H – ALL HEADER SIZES
A
B
C
ADJUST CENTER BEARING SUPPORT –
30’, 36’ & 39’
D
Summary of Contents for 973
Page 2: ...Inside Front Cover blank...
