Form # 147083
Issue 01/07
1
INTRODUCTION
Your new 973/974 Header is specially designed as a “straight cut” header, to be attached to your combine
using a model 873 Adapter. These headers are equipped to work well in all straight cut conditions, whether
cutting on or above the ground. When weather is not a critical factor, straight cutting eliminates the windrowing
operation.
NOTE:
This manual contains information on the Header only. It must be used in conjunction with your Adapter
and Combine Operator's Manual.
CAREFULLY READ ALL MANUALS TO BECOME FAMILIAR WITH RECOMMENDED PROCEDURES
BEFORE ATTEMPTING TO UNLOAD, ASSEMBLE OR USE THE MACHINE.
Use this manual as your first source of information about the header. If you follow the instructions given in this
manual your Header will work well for many years.
This manual contains information on "Safety", "Operation" and "Maintenance/Service". In addition, "Unloading
and Assembly" instruction is given towards the back of this book.
Use the Table of Contents and the Index to guide you to specific areas. Study the Table of Contents to
familiarise yourself with how the material is organised.
Keep this manual handy for frequent reference and to pass on to new operators or owners. Call your dealer if
you need assistance, information or additional copies of the manual.
NOTE:
Right hand (R/H) and Left-hand (L/H) designations are determined from the operator’s position, facing
forward.
NOTE:
A storage case for this manual is located under the left endsheet.
Summary of Contents for 973
Page 2: ...Inside Front Cover blank...
