OPERATION
51
g. Disengage the healer lift cylinder stops.
Switch the pedestal switch A to “Windrower”
mode.
h. Start the engine. Lower the center section of
the sprayer attachment to the ground by
depressing the header switch ‘-’ on the ground
speed lever.
NOTE: Place a 6” block of wood under the
center section to maintain clearance for the tractor
lift linkage and prevent the sprayer attachment
from settling in soft ground conditions after being
stored for long periods of time.
Make certain all connections are free and clear.
Then lower forks out of center section. Reverse
tractor leaving the sprayer attachment free
standing.
NOTE: Keep the sprayer attachment and SP
windrower tractor clean. Wash the outside surface
of each machine after fieldwork and dispose of the
wash water in an environmentally safe manner.
DO NOT clean the equipment upslope of ditches
or water bodies, cropland, or shelterbelts. Wash
water can contaminate the soil and can be very
toxic to fish, other wild life and people. Clean
equipment away from areas where family
members and others are likely to frequent.
Sprayer Control Switches
Sprayer attachment in the free standing
position.
Back away leaving the sprayer free standing.
A
