OPERATION
28
9. Stop engine and remove key. Exit the cab.
Raise the boom props to the storage position
and ensure they are secured by replacing the
hairpin. Ensure the boom transport cradles
are turned so that they can support the boom.
10. Start the engine. Switch to the sprayer
function “TIP LIFT/SWING” on the pedestal.
Swing the booms in to the transport position by
depressing ‘-’ on the header lift and reel lift
switches on the ground speed lever.
11. Switch to the sprayer function “LIFT” on the
pedestal. Lower the booms on to the transport
cradles by depressing ‘-’ on the header lift and
reel lift switches on the ground speed lever.
Lower the booms to the transport position.
For more information on transporting the self-
propelled windrower and sprayer attachment refer
to Transporting the Sprayer on page 46 of this
manual.
Transport Cradle
Boom Props
The boom props are used exclusively for
supporting the booms when the sprayer
attachment is removed from the tractor for
servicing or storage. Refer to Storage Procedure
on page 49 of this manual for instructions on using
the boom props. Be certain to fully install hairpins
when using the boom props.
Boom prop in the lowered position.