214079
19
Revision C
1027342
C
A
B
E
D
F
B
G
B
B
Figure 3.30: Auger Drive
19. Install new lower cover (E) and drive cover retainer (G),
retained from a previous procedure. Engage the inboard lip
of the cover into the auger tube and rotate the cover back
to engage the rear support.
20. Secure with bolts (D).
21. Install new upper cover (C) and new cover retainer plate (F)
(MD #279652).
22. Secure cover retainer plate in place with six bolts (B)
(MD #21456).
23. Replace and tighten bolts (A).
NOTE:
The covers should be as close together as possible to
prevent crop from entering the auger drive.
1018680
A
B
Figure 3.31: Auger Support
24. Slide auger support bars (A) onto the feed deck carrier
mounting posts. Repeat at opposite side.
NOTE:
The auger support bar with the
“
F
”
cut into it should be
installed towards the front of the adapter.
25. Install washers and cotter pins (B). Repeat at opposite side.
