1. INTRODUCTION
This operation instruction manual conforms to the requirements of the 2006/42/EEC Machine Directives and subsequent
amendments .
In the light of this , special attention has been given to safety aspects and accident prevention in the work-place for each
stage in the machine's "life" . Information which could be of particular assistance to the operator has been highlighted .
The "Operating instructions" are an integral part of the machine and should be consulted before , during and
after the start up of the machine and whenever else required . The content of these instructions should always
be carefully observed .
The observance of the above is the only way to achieve the two fundamental aims of this manual :
Optimization of machine performance
Prevent damage to the machine and injury to the operator
The index of the chapters and the index of the drawings , diagrams and tables is contained in chapter 3 and can be
used to help the location of specific information .
CAUTION : BEFORE INSTALLING THE MACHINE , READ THE OPERATING
INSTRUCTIONS CAREFULLY
2. INFORMATION ABOUT MAINTENANCE ASSISTANCE
2.1 GUARANTEE
MACC S.r.l. products are guaranteed against material and manufacturing defects for a period of 12 months from the
date of delivery or , if the machine is installed by MACC employees , from the date of machine start up .
The buyer is only entitled to the replacement of parts which are acknowledged as faulty : carriage and packing are at
the buyer's expense . In the event of the above , the following information should be supplied :
1. Date and number of purchasing document
2. Machine model
3. Serial number
4. Code of any relevant drawings
Requests for compensation for the inactivity of the machine will not be accepted .
The guarantee does not cover uses which are not in line with these operating instructions which are an integral part
of the machine . Nor is maintenance covered if the instructions supplied are not observed .
The guarantee will not cover machines which have undergone unauthorized modifications .
Modification or tampering with the safety devices is strictly forbidden .
3. INDEX
3.1 INDEX OF CHAPTERS
Chap.
1
Introduction
Chap.
2
Information about maintenance assistance
Chap.
3
Index of chapters , drawings , diagrams and tables
Chap.
4
Description of the machine
Safety standards complied with during the design and construction of the machine
Description of the machine and its components
Intended and unsuitable uses of the machine
Chap.
5
Main technical data
Chap.
6
Handling and transportation
Chap.
7
Installation
Chap.
8
Start up and operation
Devices and their location
Tools supplied
Operation
Special safety checks
General safety rules
Measures to prevent residual risks
Safety , Guidance , Notice Labels on the Machine
Chap.
9
Maintenance and repairs
General safety measures
Routine checks and maintenance
Description of routine maintenance
Chap.
10
Information regarding environmental noise
Chap. 11 Laying off and dismantling
Chap. 12 List of spare parts
1
