MANUAL
DT-2100
56
All programming is done using the Menu-Enter-Up-Down-Left-Right
buttons and the DT-2100 display.
TRANSPONDER FREQUENCY “IF FREQUENCY”
MENU
Press the Menu button.
Use the Up/Down buttons to specify a number.
Use the Left/Right buttons to move between the numbers.
ENTER
Press the Enter button to save and move on to the next menu
option.
The value of the setting of frequency (If frequency) depends on the local
oscillator frequency (L.O.) on the microwave head (LNB).
The frequency of the satellite channel – L.O. frequency (LNB) =
Intermediate frequency (IF) which is to be set.
Example
A satellite channel with frequency 11 309 and LNB of L.O. 9 750.
MF = 11 309 – 9 750
=
1559
is the frequency to be set.
POLARIZATION
Use the Up/Down buttons for selecting the desired polarity H/V.
ENTER
Press the Enter button to save and jump to the next menu
selection.
22KHZ
Use the Up/Down buttons 22kHz (Choose On or Off ).
ENTER
Press the Enter button to save and jump to the next menu
selection.
Programmering
ENTER TRANS
FREQ
1559
ENTER
POLARITY
H
22KHZ
OFF
00983-4 DT-2100 ENG-1.p65
2001-03-29, 11:20
56
