MANUAL
DT-2100
53
Smart card
SMARTCARD
CA-MODULE
DVB/CI-SOCKET
CARD READER
CA MODULE
A CA module connector is located at the front. This is used for channels which are coded in different
transmission systems. Conax, Viaccess, Cryptoworks, Nagravision and Irdeto are common coding
systems which can all be used with the DT-2100.
Insert the programme card into the CA module. The gold-coloured interface on the card must point
towards the front of the module. Insert the module with the programme card into the front of
DT-2100 in the DVB/CI socket. In most cases, one side of the module is marked and this side
should face the marking for the DVB/CI socket on the DT-2100.
CARD READER
The right card reader is used for a downloaded (embedded) coding system, i.e. Conax and Viaccess.
The card should be inserted with the gold coloured contact surface turned downwards – inwards.
If the programme card is not updated, the following message will appear on the TV screen: “No subscription”
Important:
• When receiving free channels, “Free To Air”, the CA module must not be connected.
• CA modules for different coding systems can be obtained from the programme companies.
• OSD information on the programme card may differ, depending on the coding system being used.
• When the CAM should be removed the button for the DVB/CI socket should be used.
00983-4 DT-2100 ENG-1.p65
2001-03-29, 11:20
53
