User Guide HC - Copyright © 2008 MAC3. All right reserved.
Man 01 Disegno 6328
38
Via Baldanzese, 149 50041 Calenzano FI
Tel. 055 8877672 – Fax 8877068
www.mac3.it - e-mail: [email protected]
English
7.1.
Restore of the factory parameter data set
Using the Maintenance menu it is possible to restore the factory parameter data set. After
restoring you need to repeat the installation procedure.
During usual operation enter the
Maintenance
Menu keeping pressed for 3 seconds the key
+
.
I twill be displayed
Keeping the key
-->
the display will show the parameters of
Maintenance
Menu. Run all
the parameter till it will be displayed:
With key
+
set the value
1
.
Press
ENTER
and keep pressed till will be displayed
”Done……”.
It will be displayed:
The device will be stopped and restart automatically and all the parameters will be on factory
data set.
Language
English
ResetFactoryConf
00000
Reset
Factory Config
