5
CHARGING THE INTERNAL BATTERY OF THE JUMP STARTER
IMPORTANT: CHARGE IMMEDIATELY AFTER PURCHASE, AFTER EACH USE AND EVERY 30 DAYS TO KEEP THE JUMP STARTER’S
INTERNAL BATTERY FULLY CHARGED. CHARGE THE JUMP STARTER INDOORS ONLY.
• Use only the included power cord.
• To reduce the risk of electric shock, unplug the jump starter before attempting any maintenance or cleaning.
• When charging the internal battery, work in a well-ventilated area and do not restrict the ventilation in any way.
LED INDICATORS
•
Internal Battery Status
Make sure the jump starter is not connected to a power source or a vehicle battery.
Press the Battery Status button
on the front of the jump starter.
•
Red – Charge now
•
Yellow – Charge soon
•
Green – Ready for jump start
•
Charging Status
Connect the jump starter to a live power source.
•
Blinking Yellow – Battery is charging
•
Solid Green – Battery is fully charged
•
Charging Percentage
While the unit is charging, press the Battery Status button
.
The LEDs indicate the charging percentage.
•
Red – 1-49% charge
•
Yellow – 50-89% charge
•
Green – 90% or higher charge
•
Combined Internal Battery and Vehicle Battery Charge
Connect the jump starter to a vehicle battery and press the Battery Status button
.
The LEDs will show the combined internal battery and vehicle battery charge.
NOTE: this is not a true reading.
•
Red – Charge now
•
Yellow – Charge soon
•
Green – Fully charged
• Charging The Internal Battery, Using the Built-In Charger
Charge the internal battery for the jump starter using the included power cord.
WARNING! USE OF AN IMPROPER POWER CORD MAY RESULT IN A RISK OF FIRE
AND ELECTRIC SHOCK.
1. Connect the power cord to the AC charging socket on the side of the jump starter.
2. Plug the power cord into a 120-240VAC electrical wall outlet.
3. While the jump starter is charging, the yellow LED will blink.
4. Complete charging may take up to 12 hours. When the yellow LED turns off and the green LED lights, the jump starter
is ready to use.
5. When the internal battery is fully charged, the charger will automatically go into maintain mode and maintain the battery
at full charge.
6. Charge the jump starter as soon as possible after use.
OPERATING INSTRUCTIONS
• Jump Starting a Vehicle Engine
IMPORTANT: Using the jump starter without a battery installed in the vehicle may damage the vehicle’s electrical system.
IMPORTANT: Do not use the jump starter while charging the internal battery.
WARNING! A SPARK NEAR THE BATTERY MAY CAUSE A BATTERY EXPLOSION.
TO REDUCE THE RISK OF A SPARK NEAR THE BATTERY:
1. Turn the vehicle’s ignition OFF before making cable connections.
2. Position the jump cables to reduce the risk of damage by the hood, door and moving of hot engine parts.
