800.MACTOOLS
7
•
Use clamps or another practical way to secure and support the workpiece to a stable platform. Holding the
work by hand or against the body is unstable and can lead to loss of control.
•
When not in use, disconnect tool from air supply to prevent accidental or unauthorized use in the absence
of the operator.
•
Do not alter any part/component/accessory of this tool in any way.
•
Mesh air strainer at air inlet occasionally becomes clogged with debris, blocking air supply, and decreasing
the tool's performance. If this occurs the mesh air strainer needs to to be cleaned.
•
Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool
or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
• Place the tool on the bolt or nut before starting the tool. Do not point or indulge in any horseplay with this
tool.
• Do not store or use in locations where the temperature may reach or exceed 40°C (such as outside sheds
or metal buildings in summer). For best life store in a cool, dry location.
IMPORTANT SAFETY INSTRUCTIONS FOR ALL BATTERY CHARGERS
SAVE THESE INSTRUCTIONS:
This manual contains important safety and operating instructions for battery
chargers.
•
Before using the charger, read all instructions and cautionary markings on the charger, battery pack and
product using the battery pack.
WARNING: Shock hazard. Do not allow any liquid to get inside the charger. Electric shock may result.
NOTICE: Under certain conditions, with the charger plugged into the power supply, the charger can be shorted
by foreign material. Foreign materials of a conductive nature, such as, but not limited to, grinding dust, metal
chips, steel wool, aluminum foil or any buildup of metallic particles should be kept away from the charger
cavities. Always unplug the charger from the power supply when there is no battery pack in the cavity. Unplug
the charger before attempting to clean.
•
DO NOT attempt to charge the LED Light Accessory with any chargers other than class 2 chargers. Class 2
chargers and the LED Light Accessory are specifi cally designed to work together.
•
Do not expose the charger to rain or snow.
•
Pull by the plug rather than the cord when disconnecting the charger. This will reduce the risk of damage
to the electric plug and cord.
•
Make sure that the cord is located so that it will not be stepped on, tripped over or otherwise subjected to
damage or stress.
•
Do not use an extension cord unless it is absolutely necessary. Use of improper extension cord could result
in risk of fi re, electric shock or electrocution.
•
When operating a charger outdoors, always provide a dry location and use an extension cord suitable for
outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
VARIABLE SPEED TRIGGER
To turn the tool on, squeeze the trigger. To turn the tool off, release the trigger. The more you squeeze the trig-
ger, the faster the tool will operate.
