Page
7
of
8
Copyright 2021
–
MAC Rail LLC. Fort Worth, Texas 76244 wwww.macrailproducts.com
STEP 6
–
ROUTE CONDUIT
After the glue dries from installing the antenna box and conduit box, its not time to
route the conduit from antenna box to the conduit box across the cab roof.
For the example model shown on the conductors side I used tweezers to make two
bends in the conduit. On engineers side I only made one bend. Cut the wire to fit up
against the conduit box and secure with glue.
After wire has dried paint with your preferred method. On conductors cab I used black
acrylic paint and a fine brush. On engineer side I used black sharpie marker.