Instruction Manual
MAN-070
4
www.macmedical.com
GENERAL SPECIFICATIONS
Power Requirements:
120 Volt, 60 Hz, single phase, 15 amp GFCI protected electrical outlet, installed per local building codes, and
provides protective grounding.
UL Approved:
All individual electronic components are UL approved and/or recognized.
Table Installation
Work Tables with the Electronic Height Adjustment Option require a power source to operate the hydraulics
system.
1. Place the table so that its left side(where its power unit is located) is near a 120 VAC GFI power outlet.
2. Plug in the table cord.
3. On the initial start-up, set the maximum and minimum heights on the control pad as shown on page 9
and 10.
4. After the initial start-up and control pad setting, thereafter simply use the up or down arrow buttons on the
control pad to raise or lower the height of the table.
