background image

Corporate Office

325 West Main Street 

Belleville, IL 62220

Manufacturing Plant

 

820 South Mulberry Street 

Millstadt, IL 62260

Phone: 618-476-3550 • Toll Free: 877-828-9975 • www.macmedical.com

MAC Medical, Inc.

Printed in USA

Publication No. MAN-070 Rev A

March 2018 

 

Information regarding this product is 

subject to change without prior notice.

Customer needs are our first priority.

To place an order, contact our customer service 

department at 

618-476-3550

 or 

877-828-9975

 or 

by email at 

[email protected]

Limited Lifetime Warranty

MAC Medical warrants to the original purchaser that its Proprietary Products will be free from 

defects in workmanship or materials under normal use and service for the life of the product, so 

long as owned by the original purchaser, according to the limitations set forth below.

Defective products shall be repaired or replaced at MAC Medical’s option at no cost to the 

original purchaser provided:

1.  The customer must obtain a written return authorization supplied by MAC Medical’s 

customer service department. The product must be returned, properly packaged, with a 

copy of the original sales receipt and copy of the RMA authorization. Please call (877) 828-

9975 or (618) 476-3550 to receive a return authorization.

2.  The customer must pre-pay freight charges to and from MAC Medical and must ship 

merchandise properly packaged, in a way the product will not be damaged during transit 

to the factory. MAC Medical does not warranty any freight damage to or from the factory. It 

is the customer’s responsibility to inspect the product for packaging damage before signing 

the BOL.

This warranty does not apply to products, which have been subject to abuse, misuse, accident, 

modification, alteration, tampering, negligence, lack of routine maintenance or misapplication; 

or products that have been repaired by other than MAC Medical or its authorized 

representatives.
This warranty does not apply to glass, fabrics, vinyl, seat coverings, cushions, padding or their 

stitching, gluing or installation. Component parts not manufactured by MAC Medical, such 

as casters, caster inserts, any components made from rubber or plastic, circuit boards, fan 

heaters, plumbing parts, electrical switches and other components are also excluded. For 

these component parts, MAC Medical will pass on the original manufacturer’s warranty to 

MAC Medical equipment original purchasers. Please consult factory for questions regarding 

the warranties of these component parts. This warranty does not apply to custom fabricated 

products. Consult factory.

UNLESS EXPRESSLY SET FORTH IN THIS WARRANTY, THERE ARE NO OTHER WARRANTIES, WHETHER 

EXPRESS OR IMPLIED, OF FITNESS AND / OR MERCHANTABILITY OR ANY OTHER WARRANTY IMPLIED 

BY CUSTOM, USAGE OR COURSE OF DEALING.

Liability of MAC Medical under this warranty is limited to the repair and / or replacement of any 

products. MAC Medical specifically excludes and disclaims any responsibility for any incidental 

or consequential damages claimed to have arisen from any defect in workmanship or materials. 

No representative has any authority to change or enlarge the above warranty or MAC Medical 

liability. This document supersedes all previous warranty provisions.

Summary of Contents for WT0003

















Reviews: