Fig. 5: Remove switch bolts
Fig. 6: Remove Access Panel and pull out Switch
Instruction Manual
MAN-040
10
www.macmedical.com
Accessing the Switch
The switch must be accessed through the access panel
located in the interior righthand side of the cabinet. The
switch must be partially removed from the cabinet in
order to access the switch Calibration button.
1. At the front of the cabinet, remove the two bolts that
hold the switch in place (Fig. 5). Set the bolts aside
for later use.
2. Remove the bolt from the access plate from inside the cabinet and remove the access plate (Fig. 6).
3. Pull the switch out (Fig. 5). Do not detach the wires.