Mac Medical ES Series Instruction Manual Download Page 2

Page: 2 / 18

Instruction Manual

MAN-009

www.macmedical.com

KEEP THIS MANUAL

DESCRIPTION OF PRODUCT

This manual covers manual knee operated and Infrared self-activated Economy Scrub Sink models -

•

ES25 - single basin

•

ES47 - double basin

•

ES76 - triple basin

PURPOSE OF THIS MANUAL

This user manual details the installation, operation maintenance and cleaning of the MAC Medical Economy

Scrub Sinks. This manual also contains general specifications, warnings and cautions.

Table of Contents

Warnings and Cautions Icon Key

General Specifications

Economy Sink Uncrating Instructions

Installation

Recommended Mounting Specifications and Water Supply Locations - Single Basin

Recommended Mounting Specifications and Water Supply Locations - Double Basin

Recommended Mounting Specifications and Water Supply Locations - Triple Basin

Installing and Operating the Soap Spout

Connect Drain Pipe to Drain and Plumbing to Water Lines

Plumbing Install Instructions

Adjusting Mixing Valve Temperature

Troubleshooting Plumbing

Replacement Parts for Manual Knee Operated and Infrared Self-Activated Sink Plumbing

Infrared Controls (for Infrared Self-Activated Sinks only)

Installation

Operation

Optional Add-ons

Instructions for Cleaning Stainless Steel Economy Sinks

Limited Lifetime Warranty

Summary of Contents for ES Series



















Search results

Summary of Contents for ES Series

Reviews:

Related manuals for ES Series

Brands by name

Popular brands

Mac Medical ES Series, Instruction Manual

Search results

Summary of Contents for ES Series

Reviews:

Related manuals for ES Series

Brands by name

Popular brands