PAGE | 02
8
66 558 3200 310 919 3073 Info@mac
fauc
ets.com www.mac
faucets.com
M
AC FAUCETS
Calif
ornia, USA
10
11
12
Remove the
cap from the
soap
container.
Fill the soap
container with
liquid soap.
DO NOT USE
GRIT TYPE
SOAPS.
Put back the
cap and close
the soap
container.
08
Remove the soap
container and
install the soap
dispenser in place,
fasten securely.
09
Put back
the soap
container,
making sure the
the pump is
inserted in the
yoke
13
14
02
03
15
01
Take the
battery case
out of the
compartment
Pull the tab
out of the
battery case,
and insert it
back in the
battery case
compartment
Tab
Pump
lnsert six (6)AA size alkaline
as shown in Battery
compartment figure 02.
Close the compartment
by sliding the tab until it
clicks into in place.
Close the cover,
make sure the
cover is locked
and secured
against the back
plate.
Usage:
Replacing Batteries
01
L
oading batteries and the LED will flash 3 times
indicating the dispenser is ready for use.place hand(s)
underneath dispenser within 5" of the sensor,the
dispenser will dispense approximately 2ml of soap
(O.Bml foam soap) into your hand(s).
02
*Please pass the instruction to the user after finish install
Battery
compartment
open
Push the Battery
Case to close
Press this tab
to Open
Back Plate
Soap re-fill
Pump
Battery Case
Battery
Compartment
Cover
Power Switch
Yoke
Led Indicator
For reference See Replacement Batteries
N
ote:
1. The dispenser cover must be closed to activate.
2. When the batteries are too low, the LED will blink
continuously. The dispenser will not work, change the
batteries inmmediately.