manualshive.com logo in svg

Mac allister MHTP24EB, Manual, Page: 31 / 40

Share
Download
Mac allister MHTP24EB Manual Download Page 31

Technical and legal information

MHTP24EB

 by MacAllister

GB

IE

In 

more

 detail...

31

Naked flames in the work area, around the product and in 

the vicinity of flammable materials are prohibited
Do not smoke in the work area, around the product and in 

the vicinity of flammable materials

Do not use in rain or wet conditions.

Press the unlock button down and turn the rear handle.

Guaranteed sound power level value in dB

The product complies with the applicable European 

directives and an evaluation method of conformity for 

these directives was done.

Safety warnings

>  This product is not intended for use by persons (including 

children) with reduced physical, sensory or mental capabilities, 

or  lack  of  experience  and  knowledge,  unless  they  have  been 

given supervision or instruction concerning use of the product by 

a person responsible for their safety.

>  Children should be supervised to ensure that they do not play 

with the product.

Petrol powered hedge trimmer safety warnings

IMPORTANT

Read carefully before use

Keep for future reference

Summary of Contents for MHTP24EB









































Reviews:

No comments