GB
IE
In
more
detail...
Product functions
MHTP24EB
by MacAllister
12
Intended use
This petrol hedge trimmer MHTP24EB is designated with an engine
displacement of 24.5 cm³. The product is intended for trimming
hedges, bushes and shrubs. Observe the technical data for the
maximum cutting capacity. Do not cut branches exceeding the
stated maximum capacity.This product is intended for private use
only, not for any commercial applications. It may not be used for any
purposes other than those described.
Handle adjustment
The handle can be adjusted ± 90° to left and
right side according to the required cut.
> Press the unlock button (18) down and
hold it in its lower position (Fig. 3).
> Turn the rear handle (16) in desired
direction to the end. Make sure the
handle engages in position (Figs. 4 – 6).
18
16
Fig. 3
16
Fig. 4, left position
Fig. 5, initial position Fig. 6, right position
WARNING!
Only adjust the handle position when the
engine is switched off! Always ensure that the handle
locks in one of the end positions, never use it at an
intermediate position!
18
16
Fig. 3
16
Fig. 4, left position
Fig. 5, initial position Fig. 6, right position
Fig. 3
Fig. 4, left position
Fig. 5, initial position Fig. 6, right position