manualshive.com logo in svg

Mac allister MHTP24EB, Manual, Page: 16 / 40

Share
Download
Mac allister MHTP24EB Manual Download Page 16

GB

IE

In 

more

 detail...

Operation

MHTP24EB

 by MacAllister

16

General behaviour

>  Check the product as well as accessories for damage before 

each use. Do not use the product if it is damaged or shows wear.

>  Double  check  that  accessories,  safety  guards  and  blades  are 

properly fixed.

>  Always hold the product by its handles. Keep the handles dry to 

ensure safe support.

>  Ensure that the air vents are always unobstructed and clean. 

Clean them if necessary with a soft brush. Blocked air vents may 

lead to overheating and damage the product.

>  Switch the product off immediately if you are disturbed while 

working with it and when other people enter the working area. 

Always let the product come to complete stop before putting it 

down.

>  Do not overwork yourself. Take breaks on a regular basis to 

ensure you can concentrate on the work and have full control 

over the product.

Trimming times

green leaf hedges

June to October

evergreens

April and August

conifers and other fast growing shrubs

every 6 - 8 weeks

Summary of Contents for MHTP24EB









































Reviews:

No comments