Mac allister MHTP245-2 User Manual Download

Page: 34 / 40

MHTP245-2

by MacAllister

Technical and legal information

detail...

Maintenance and storage

When the product is stopped for servicing, inspection or storage,

shut off the power source, disconnect the spark plug wire from

the spark plug and make sure all moving parts have come to a

stop. Allow the product to cool before making any inspections,

adjustments, etc.

Store the product where the fuel vapour will not reach an open

flame or spark. Always allow the product to cool down before

storing.

When transporting or storing the product, always fit the cutting

device transport guard.

Additional safety warnings

Keep all parts of the body away from the cutting blade. Do not

remove cut material or hold material to be cut when blades

are moving. Make sure the switch is off when clearing jammed

material. A moment of inattention while operating the product

may result in serious personal injury.

Carry the product by the handle with the cutting blade stopped.

When transporting or storing the product always fit the cutting

blade cover. Proper handling of the product will reduce possible

personal injury from the cutting blade.

Hold the product by insulated gripping surfaces only, because

the cutting blade may contact hidden wiring. Cutting blades

contacting a “live” wire may make exposed metal parts of the

product “live” and could give the operator an electric shock.

Keep hands and feet away from the cutting blade at all times and

especially when switching on the engine.

Do not try to grasp or remove trimmings when the product is

running. Only remove trimmings when the product is switched

off and disconnected from the power supply.

Check the work area for foreign objects before operation, e.g.

wire fences. Take care that the cutting blade does not come into

contact with wire or other metal objects.

Never hold the product by the guard.

Always be sure of a safe and secure operating position, whilst

using the product. Always be sure of your footing when using steps

and when using your product. Never use the product standing

on steps or a ladder. Do not work over shoulder height.

Safety warnings

MNL_MHTP245-2_DFT_GB_V3_111118.indd 34

11/18/11 5:57:25 PM

Summary of Contents for MHTP245-2









































Search results

Summary of Contents for MHTP245-2

Reviews:

Related manuals for MHTP245-2

Brands by name

Popular brands

Mac allister MHTP245-2, User Manual

Search results

Summary of Contents for MHTP245-2

Reviews:

Related manuals for MHTP245-2

Brands by name

Popular brands