MHTP245-2
by MacAllister
19
In
more
detail...
GB
IE
Care and maintenance
The golden rules for care
WARNING!
Only perform repairs and maintenance work
according to these instructions! All further works must be
performed by a qualified specialist!
General cleaning
Clean the product with a slightly damp cloth and mild soap. Use
>
a brush for areas that are hard to reach.
Pay particular attention to the air vents (19) and to the cutting
>
device.
Remove stubborn dirt with high pressure air (max. 3 bar).
>
NOTE:
Do not use chemical, alkaline, abrasive or other
aggressive detergents or disinfectants to clean this
product as they might be harmful to its surfaces.
WARNING!
Always switch the product off, let the product
cool down and disconnect the spark plug connector before
performing inspection, maintenance and cleaning work!
Keep the product clean and free from debris after each use and
>
before storage.
Regular and correct cleaning of this product will help ensure
>
safe use and prolong the life of the product.
Inspect the product before each use for worn and damaged
>
parts. Do not operate it if any parts are broken or show signs of
wear.
Check for worn or damaged parts. Replace worn parts as
>
necessary or contact an authorised service centre before using
the product again.
MNL_MHTP245-2_DFT_GB_V3_111118.indd 19
11/18/11 5:57:22 PM
