MHTP245-2
by MacAllister
Product functions
14
In
more
detail...
GB
IE
If the engine is warm, move the choke
>
lever (8) to the “OPEN” position
,
do not press the primer (Fig. 10).
Hold the product stable and pull
>
the recoil starter handle (15) firmly;
repeat until the engine starts
(Fig. 11).
15
Fig. 11
Starting / Stopping
WARNING!
Make sure that the cutting device is not
touching the ground or other objects when starting the
product!
Allow the recoil starter rope to return slowly and controlled
after each pull!
Allow the product to run at idle speed for 10 to 15 seconds to let
>
it warm up; move the choke lever (8) to its “OPEN” position
once the engine is warm.
Once the engine is running correctly, carefully lift the product
>
and securely hold it by its handles.
NOTE:
During idle running the cutting device should not
move. Contact a qualified technician if you find that the
cutting device is moving.
MNL_MHTP245-2_DFT_GB_V3_111118.indd 14
11/18/11 5:57:19 PM
