EN
26
In
more
detail...
MGT45028
by MacAllister
NOTE:
While trimming, the cutting device is possible to be blocked by
grass or unevenly ground. So the product will turn off automatically
due to over current. Therefore release the on/off switch for over 3s
and then press down again to go on with trimming.
Trimming Line feeding
During use, the tip of the trimming lines (12d) will get shorter due to wear and the
trimming line may break. Regularly check the condition of the trimming lines (12d)
and adjust if necessary.
WARNING!
Always switch the product off, disconnect the product
from the power supply and let the product cool down before
performing inspection, maintenance and cleaning work!
NOTE: T
his product is equipped with an auto-feed head. Do not bump
the trimmer head on the ground as this would damage the product.
Manual feeding
1. Turn trimmer head (12) upside down.
2. Press the release push button (12g) while pulling on the trimming lines (12d).
The trimming spool (12c) will release the trimming lines (Fig. 21).
11b
12c
12d
11
12
Fig. 21
3. Repeat until the worn part of the trimming lines (12d) exceeds the distanceto
the knife (11b).
4. Switch the product on and use the product as described. Excess line will be
cut by the knife (11b) and should always remain inside the radius of the guard
(11).
Operation
Summary of Contents for MGT45028
Page 40: ......