EN
24
In
more
detail...
MGT45028
by MacAllister
Operation
Trimming
1. Make sure that the knife protector (11d) is removed and the plant protector (13)
is pulled out before operation.
2. Adjust the main handle (1) angle to 0° for trimming.
3. Hold the product firmly with a gap between the product and your right side.
4. Stand upright, do not lean forward and pay attention to posture. Keep both
feet apart to help retain your balance.
5. Hold the trimmer head (12) just above the ground at an angle of approximately
30° (Fig. 14).
6. Move the product with a slow regular arc from left to right before moving it
back to the starting position before trimming the next area (Fig. 15).
Fig. 14
Fig. 15
7. Ensure the cutting device remains clean and free from off-cuts that may cause
it to jam. Check regularly. Release the on/off switch (2) and disconnect the
product from the power supply before checking.
8. Trim longer grass in stages; do not cut long grass in one cut (Fig. 16). For the
best results, cut longer grass in steps (Fig. 17).
Fig. 16
Fig. 17
Summary of Contents for MGT45028
Page 40: ......