10
9
06
Adjusting to correct ceiling height:
Refer to step 9, 10 and 11 from
assembly instructions for detail on
adjusting the length of the ladder.
WARNING: DO NOT SHORTEN THE
LADDER TOO MUCH.
If the ladder is
too short, it may unexpectedly fold up
during use, thus risking serious personal
injury. To check that the ladder is the
correct length, unfold it to its full length.
All sections of the ladder must be
aligned perfectly with no gaps, and both
strings must rest flat on the floor (see
figure 8).
DO NOT use the ladder if all sections of the ladder are not aligned. If the ladder is too long, shorten the
strings once more. If the ladder is too short, order a new lower section from your dealer. Do NOT allow the
ladder to rest on a box, blocks, platform or similar. Such constructions are unsafe and unstable, and do not
provide appropriate permanent support for the ladder.
07
How to use the ladder:
The following drawings show how to use the loft ladder safely (see figure 9).
NOTE:
If your building construction differs from installation guide above, consult an expert.
WARNING
: Never modify the product. The manufacturer accepts no liability whatsoever for personal injury
or damage caused to the building or parts thereof by a product, whose construction has been modified.
Figure 9A
Figure 9B
Figure 9C
Figure 7
Figure 8
PN115998-01 Macallister_LL2T_Loft_Ladder_Instruction_Manual_A5_Rev0618_V2.indd 9
22/06/2018 14:03
10
9
Safety & Operation
Use
01
Repair & Maintenance
•
Repairs and maintenance shall be carried out by a competent person and be in accordance with these
instructions.
NOTE:
A competent person is someone who has the skills to carry out repairs or maintenance,
eg. trained by the manufacturer.
•
For repair and replacement of parts, e.g. feet, springs and hooks, contact your supplier or distributor.
•
Ladders shall always be operated in accordance with the producer's instructions.
•
Timber loft ladder stiles and treads should not be painted or varnished.
•
Periodically lubricate all moving parts with light oil.
•
Periodically clean all timber parts to prevent the build-up of dirt, grease and other contaminants.
02
Traceability
For traceability purpose it can be identified by the barcode (EAN) number and also manufacturing date or serial
number, these can be found on the trapdoor.
Care & Maintenance
•
Never use this loft ladder for purposes for which it has not been designed, such as trade or building work.
•
Never use this product unless it has been fully, and correctly, installed.
•
Fully open trapdoor before unfolding the ladder.
•
Ensure the springs and connecting wires have not become trapped or snagged.
•
Ensure the springs and connecting wires are correctly positioned and are secure.
•
Fully unfold ladder before use.
•
Ensure any catches or locks are fully engaged before ascending the ladder.
•
Ensure both ladder feet rest firmly on the floor before climbing the ladder.
•
Inspect the ladder before climbing (see above) – do not use if damaged.
•
Only wear suitable footwear whenever ascending or descending the ladder.
•
Maintain 3 points of contact by gripping the handrail or ladder stiles when ascending or descending.
•
Do not overload the ladder by carrying heavy objects.
•
Take care when carrying awkward shaped objects up and down the ladder.
•
Keep a firm grip on anything being carried to prevent the object falling.
•
Only ascend and descend the ladder by facing the treads.
•
Never exit the ladder by stepping away from the treads.
•
Ensure the trapdoor is securely locked after use.
Pre-Use and periodic checks:
•
Check stiles and treads are not split, warped, bowed, loose, rotten or otherwise damaged.
•
Check all screws, bolts and nuts are secure and tight (do not overtighten).
•
Check trapdoor locks into position correctly.
•
Check metal parts are not corroded or otherwise damaged.
•
Check all hinges operate smoothly (lubricate periodically – see label on trapdoor).
•
Check ladder sections operate smoothly when opened.
•
Check ladder sections are straight when fully opened.
•
Check ladder feet rest firmly on the floor.
•
Check ladder sections are flat and correctly positioned once folded.
PN115998-01 Macallister_LL2T_Loft_Ladder_Instruction_Manual_A5_Rev0618_V2.indd 10
22/06/2018 14:03
PN115998-01 Macallister_LL2T_Loft_Ladder_Instruction_Manual_A5_Rev1219_PRINT
11
11/12/2019 16:13
